Equipment / PA System
We have just implemented a new PA system
![]() |
Subwoofers: JBL SRX 718S (Single 18" speaker) 1 Cabinet per side |
|
![]() |
Mids/Highs: JBL SRX 715 (Pole Mounted-1 Cabinet per side) |
|
| For very tight spaces, 2 JBL EON powered speakers are mounted on tripods and the main Crossover is bypassed. |
![]() |
|
House Power Amps: QSC PLX3602 - Subwoofer Amp, (1250W@4Ohms)
|
![]() |
| The House Board is a Mackie Onyx 24-4, which replaces the Carvin 24 Channel, 4-bus Mixer, connected by a
100' snake
to the stage. All busses & L/R faders are summed to a Center output. A Mono
signal is sent from the board to:
DBX 2031 Mono 31 band EQ A custom 100 ft, 24 channel snake splits inputs 1-12 to send the vocals & instruments inputs to the Stage monitor mixer. Any remaining splits are handled by the stage mixer which also has built-in splitters on all 16 channels. The remaining 12 snake channels are straight inputs to the house mixer. A Symetrix headphone amp is used to cue up mixer channels. Retired: Alternate set-up: A Mono signal is sent from the board to: DBX Driverack PA, (which splits the Low/Mid/High and feeds the 3 House amps onstage via the snake) |
![]() Mackie Onyx 24x4 |
| Outboard effects: |
Yamaha
SPX90 (single effects unit) Carvin XP4 (Quad effects unit) Lexicon MX200 (Dual Effects unit) |
Carvin XP4 |
| Signal processors: | DOD 1/3 octave Digital Graphic EQ BBE 822 Aural Enhancer Alesis 3630 dual channel Compressor (x2) DBX 266XL Compressor/Gate DBX 160X Compressor Alesis PEQ-450 dual 5 band Parametric EQ DBX Driverack PA |
The Alesis 3630 & DBX 266XL Compressors are wired into a Teac patch bay and patched in to individual channels as necessary